Cheers to the New Year stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “CHEERS TO THE NEW YEAR” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 49 mm (3.94 × 1.92 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 19: 1 outer edge and 18 cut-outs |
| Cut length | 1,174 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 390 curve and line segments |
Measured from the file. PNG: 2,000 × 1,013 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.49 in (25 × 12 mm) | 0.43 mm | 298 mm | 170 | Too fine for most machines |
| 2 × 0.97 in (51 × 25 mm) | 0.86 mm | 596 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.46 in (76 × 37 mm) | 1.3 mm | 895 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.95 in (102 × 49 mm) | 1.7 mm | 1,193 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.92 in (152 × 74 mm) | 2.6 mm | 1,789 mm | 3 | Vinyl, card and thin sheet |
| 8 × 3.9 in (203 × 99 mm) | 3.5 mm | 2,386 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 5.84 in (305 × 148 mm) | 5.2 mm | 3,578 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Cheers to the New Year SVG files
-
Cheers to the New Year with a drop shadow Layered · 11 pieces
-
Cheers to the New Year with two champagne flutes Solid · 14 pieces
-
Cheers to the New Year in Pacifico Solid · 6 pieces
-
Cheers to the New Year in Lobster Solid · 8 pieces
-
Cheers to the New Year in Kaushan Script Solid · 18 pieces
-
Cheers to the New Year in Lilita One Solid · 18 pieces
-
Cheers to the New Year in Alfa Slab One Solid · 17 pieces
-
Cheers to the New Year in Amatic SC Solid · 18 pieces
← Cheers to the New Year outline lettering All 13 Cheers to the New Year designs Cheers to the New Year with a drop shadow →