Cheers to the New Year in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Cheers to the New Year” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 33 mm (3.94 × 1.28 in), scales to any size |
|---|---|
| Pieces | 18 separate pieces |
| Outlines to cut | 25: 18 outer edges and 7 cut-outs |
| Cut length | 765 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 339 curve and line segments |
Measured from the file. PNG: 2,000 × 702 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.33 in (25 × 8 mm) | 0.48 mm | 194 mm | 230 | Too fine for most machines |
| 2 × 0.65 in (51 × 17 mm) | 0.97 mm | 389 mm | 70 | Fine detail: vinyl and paper only, weed with care |
| 3 × 0.98 in (76 × 25 mm) | 1.4 mm | 583 mm | 30 | Vinyl, card and thin sheet |
| 4 × 1.3 in (102 × 33 mm) | 1.9 mm | 777 mm | 16 | Vinyl, card and thin sheet |
| 6 × 1.95 in (152 × 50 mm) | 2.9 mm | 1,166 mm | 5 | Vinyl, card and thin sheet |
| 8 × 2.6 in (203 × 66 mm) | 3.9 mm | 1,554 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 3.9 in (305 × 99 mm) | 5.8 mm | 2,332 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Cheers to the New Year SVG files
-
Cheers to the New Year in Alfa Slab One Solid · 17 pieces
-
Cheers to the New Year in Amatic SC Solid · 18 pieces
-
Cheers to the New Year in block capitals Solid · 18 pieces
-
Cheers to the New Year in script and capitals Solid · 13 pieces
-
Cheers to the New Year with stars Solid · 14 pieces
-
Cheers to the New Year outline lettering Outline · 18 pieces
-
Cheers to the New Year stencil plate Solid · one piece
-
Cheers to the New Year with a drop shadow Layered · 11 pieces
← Cheers to the New Year in Kaushan Script All 13 Cheers to the New Year designs Cheers to the New Year in Alfa Slab One →