Cheers to 40 Years outline lettering SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Cheers to 40 Years” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.
What is in the file
| Size | 100 × 44 mm (3.94 × 1.72 in), scales to any size |
|---|---|
| Pieces | 17 separate pieces |
| Outlines to cut | 49: 17 outer edges and 32 cut-outs |
| Cut length | 1,349 mm at this size |
| Narrowest part | 1.5 mm at this size |
| Nodes | 564 curve and line segments |
Measured from the file. PNG: 2,000 × 917 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.44 in (25 × 11 mm) | 0.38 mm | 343 mm | 190 | Too fine for most machines |
| 2 × 0.87 in (51 × 22 mm) | 0.76 mm | 685 mm | 55 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.31 in (76 × 33 mm) | 1.1 mm | 1,028 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.75 in (102 × 44 mm) | 1.5 mm | 1,371 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.62 in (152 × 67 mm) | 2.3 mm | 2,056 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.5 in (203 × 89 mm) | 3 mm | 2,741 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.24 in (305 × 133 mm) | 4.6 mm | 4,112 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Cheers to 40 Years SVG files
-
Cheers to 40 Years stencil plate Solid · one piece
-
Cheers to 40 Years with a drop shadow Layered · 11 pieces
-
Cheers to 40 Years with two champagne flutes Solid · 11 pieces
-
Cheers to 40 Years in Pacifico Solid · 7 pieces
-
Cheers to 40 Years in Lobster Solid · 8 pieces
-
Cheers to 40 Years in Kaushan Script Solid · 15 pieces
-
Cheers to 40 Years in Lilita One Solid · 15 pieces
-
Cheers to 40 Years in Alfa Slab One Solid · 15 pieces
← Cheers to 40 Years with stars All 13 Cheers to 40 Years designs Cheers to 40 Years stencil plate →