Cheers to 40 Years in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Cheers to 40 Years” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 46 mm (3.94 × 1.83 in), scales to any size |
|---|---|
| Pieces | 15 separate pieces |
| Outlines to cut | 22: 15 outer edges and 7 cut-outs |
| Cut length | 880 mm at this size |
| Narrowest part | 3.4 mm at this size |
| Nodes | 331 curve and line segments |
Measured from the file. PNG: 2,000 × 969 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.46 in (25 × 12 mm) | 0.86 mm | 224 mm | 180 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.93 in (51 × 24 mm) | 1.7 mm | 447 mm | 50 | Vinyl, card and thin sheet |
| 3 × 1.39 in (76 × 35 mm) | 2.6 mm | 671 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.86 in (102 × 47 mm) | 3.5 mm | 894 mm | 10 | Any material, including 3 mm wood and acrylic |
| 6 × 2.78 in (152 × 71 mm) | 5.2 mm | 1,341 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.71 in (203 × 94 mm) | 6.9 mm | 1,788 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.57 in (305 × 141 mm) | 10 mm | 2,682 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Cheers to 40 Years SVG files
-
Cheers to 40 Years in Alfa Slab One Solid · 15 pieces -
Cheers to 40 Years in Amatic SC Solid · 15 pieces -
Cheers to 40 Years in block capitals Solid · 15 pieces -
Cheers to 40 Years in script and capitals Solid · 10 pieces -
Cheers to 40 Years with stars Solid · 14 pieces -
Cheers to 40 Years outline lettering Outline · 18 pieces -
Cheers to 40 Years stencil plate Solid · one piece -
Cheers to 40 Years with a drop shadow Layered · 11 pieces
← Cheers to 40 Years in Kaushan Script All 12 Cheers to 40 Years designs Cheers to 40 Years in Alfa Slab One →