Free check mark SVG

Checklist with three ticks SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Checklist with three ticks, as a solid black shape
Checklist with three ticks. The preview is the SVG file itself.

A clipboard page with three ticked lines cut out of it: a tick and a bar on each. One piece with a hanging hole in the clip.

What is in the file

Size76 × 100 mm (2.99 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length732 mm at this size
Narrowest part3 mm at this size
Nodes63 curve and line segments

Measured from the file. PNG: 1,538 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.76 × 1 in (19 × 25 mm)0.76 mm186 mm120Fine detail: vinyl and paper only, weed with care
1.52 × 2 in (39 × 51 mm)1.5 mm372 mm35Vinyl, card and thin sheet
2.28 × 3 in (58 × 76 mm)2.3 mm558 mm12Vinyl, card and thin sheet
3.04 × 4 in (77 × 102 mm)3 mm744 mm6Any material, including 3 mm wood and acrylic
4.56 × 6 in (116 × 152 mm)4.6 mm1,116 mm2Any material, including 3 mm wood and acrylic
6.08 × 8 in (154 × 203 mm)6.1 mm1,487 mm1Any material, including 3 mm wood and acrylic
9.12 × 12 in (232 × 305 mm)9.1 mm2,231 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More check mark SVG files

← Dotted check mark All 15 check marks Check mark and cross →