Free cat SVG

Walking cat silhouette SVG

Walking cat silhouette, as a solid black shape — Walking cat silhouette. The preview is the SVG file itself.

A cat mid-stride in profile with its tail held up in a curve. Long and low, for the bottom edge of a sign, a shelf decal or a row along a wall.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 79 mm (3.94 × 3.11 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	545 mm at this size
Narrowest part	4.6 mm at this size
Nodes	186 curve and line segments

Measured from the file. PNG: 2,000 × 1,598 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.79 in (25 × 20 mm)	1.2 mm	138 mm	120	Vinyl, card and thin sheet
2 × 1.58 in (51 × 40 mm)	2.3 mm	277 mm	30	Vinyl, card and thin sheet
3 × 2.37 in (76 × 60 mm)	3.5 mm	415 mm	12	Any material, including 3 mm wood and acrylic
4 × 3.16 in (102 × 80 mm)	4.7 mm	554 mm	6	Any material, including 3 mm wood and acrylic
6 × 4.75 in (152 × 121 mm)	7 mm	831 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.33 in (203 × 161 mm)	9.3 mm	1,107 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.49 in (305 × 241 mm)	14 mm	1,661 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cat SVG files

← Cat sitting from behind All 20 cats Halloween cat with an arched back →