Free carrot SVG

Carrot nose for a snowman SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Carrot nose for a snowman, as a solid black shape
Carrot nose for a snowman. The preview is the SVG file itself.

A carrot with no leaves, lying on its side with the tip to the right and four ring marks cut into it. The shape to stick on a snowman face, a door hanger or a winter jumper.

What is in the file

Size100 × 30 mm (3.94 × 1.16 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length342 mm at this size
Narrowest part2.4 mm at this size
Nodes64 curve and line segments

Measured from the file. PNG: 2,000 × 644 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.3 in (25 × 7 mm)0.61 mm87 mm240Fine detail: vinyl and paper only, weed with care
2 × 0.59 in (51 × 15 mm)1.2 mm174 mm75Vinyl, card and thin sheet
3 × 0.88 in (76 × 22 mm)1.8 mm261 mm33Vinyl, card and thin sheet
4 × 1.18 in (102 × 30 mm)2.4 mm347 mm16Vinyl, card and thin sheet
6 × 1.77 in (152 × 45 mm)3.7 mm521 mm6Any material, including 3 mm wood and acrylic
8 × 2.36 in (203 × 60 mm)4.9 mm695 mm4Any material, including 3 mm wood and acrylic
12 × 3.54 in (305 × 90 mm)7.3 mm1,042 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More carrot SVG files

← Carrot outline All 14 carrots Bunch of three carrots →