Free carousel SVG

Roller coaster with three cars SVG

Roller coaster with three cars, as a solid black shape
Roller coaster with three cars. The preview is the SVG file itself.

A wooden roller coaster in profile: a steep lift hill, a dip, a second hump and a run home, held up by eleven posts and three rails, with a train of three cars climbing the first hill.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 60 mm (3.94 × 2.36 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut21: 1 outer edge and 20 cut-outs
Cut length1,162 mm at this size
Narrowest part2.1 mm at this size
Nodes186 curve and line segments

Measured from the file. PNG: 2,000 × 1,229 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.6 in (25 × 15 mm)0.53 mm295 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.2 in (51 × 30 mm)1.1 mm590 mm40Vinyl, card and thin sheet
3 × 1.8 in (76 × 46 mm)1.6 mm885 mm18Vinyl, card and thin sheet
4 × 2.4 in (102 × 61 mm)2.1 mm1,181 mm8Vinyl, card and thin sheet
6 × 3.59 in (152 × 91 mm)3.2 mm1,771 mm3Any material, including 3 mm wood and acrylic
8 × 4.79 in (203 × 122 mm)4.3 mm2,361 mm2Any material, including 3 mm wood and acrylic
12 × 7.19 in (305 × 183 mm)6.4 mm3,542 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More carousel SVG files

← Ferris wheel silhouette with a ticket booth All 13 carousels Chair swing ride →