Free cake topper SVG

Happy Birthday cake topper in a hoop SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Happy Birthday cake topper in a hoop, as a solid black shape
Happy Birthday cake topper in a hoop. The preview is the SVG file itself.

The greeting set inside a ring: the first and last letters of “Birthday” run into the ring on either side, which carries the words, and one stake drops from the foot of the ring. Cut 150 mm wide, the ring is 9 mm broad, the topper 210 mm tall and the stake 10 mm wide.

What is in the file

Size71 × 100 mm (2.81 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut17: 1 outer edge and 16 cut-outs
Cut length1,036 mm at this size
Narrowest part1 mm at this size
Nodes395 curve and line segments
Also found asCircle cake topper SVG

Measured from the file. PNG: 1,450 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.71 × 1 in (18 × 25 mm)0.25 mm263 mm130Too fine for most machines
1.43 × 2 in (36 × 51 mm)0.51 mm526 mm35Fine detail: vinyl and paper only, weed with care
2.14 × 3 in (54 × 76 mm)0.76 mm789 mm15Fine detail: vinyl and paper only, weed with care
2.86 × 4 in (73 × 102 mm)1 mm1,053 mm6Vinyl, card and thin sheet
4.28 × 6 in (109 × 152 mm)1.5 mm1,579 mm2Vinyl, card and thin sheet
5.71 × 8 in (145 × 203 mm)2 mm2,105 mm2Vinyl, card and thin sheet
8.57 × 12 in (218 × 305 mm)3 mm3,158 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cake topper SVG files

← Happy Birthday cake topper on two stakes All 13 cake toppers One cake topper for a first birthday →