Free cabin SVG

Cabin with a porch and a stone chimney SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cabin with a porch and a stone chimney, as a solid black shape
Cabin with a porch and a stone chimney. The preview is the SVG file itself.

A log cabin seen from the side: a tall stone chimney up one end, a shingled roof, a four-pane window, and a lean-to porch with a post and a railing at the other end.

What is in the file

Size100 × 66 mm (3.94 × 2.6 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut26: 1 outer edge and 25 cut-outs
Cut length1,142 mm at this size
Narrowest part1 mm at this size
Nodes191 curve and line segments

Measured from the file. PNG: 2,000 × 1,348 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.66 in (25 × 17 mm)0.25 mm290 mm140Too fine for most machines
2 × 1.32 in (51 × 34 mm)0.51 mm580 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.98 in (76 × 50 mm)0.76 mm870 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.64 in (102 × 67 mm)1 mm1,160 mm8Vinyl, card and thin sheet
6 × 3.97 in (152 × 101 mm)1.5 mm1,740 mm2Vinyl, card and thin sheet
8 × 5.29 in (203 × 134 mm)2 mm2,321 mm2Vinyl, card and thin sheet
12 × 7.93 in (305 × 201 mm)3 mm3,481 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cabin SVG files

← A-frame cabin on a deck All 13 cabins Lake cabin with a jetty →