Free Bump’s First Christmas SVG

Bump’s First Christmas stencil plate SVG

Bump’s First Christmas stencil plate, as a solid black shape
Bump’s First Christmas stencil plate. The preview is the SVG file itself.

A rounded plate with “BUMP’S FIRST CHRISTMAS” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 98 mm (3.94 × 3.85 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut21: 1 outer edge and 20 cut-outs
Cut length1,928 mm at this size
Narrowest part1.6 mm at this size
Nodes460 curve and line segments

Measured from the file. PNG: 2,000 × 1,958 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.98 in (25 × 25 mm)0.41 mm490 mm100Too fine for most machines
2 × 1.96 in (51 × 50 mm)0.81 mm979 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.93 in (76 × 75 mm)1.2 mm1,469 mm9Vinyl, card and thin sheet
4 × 3.91 in (102 × 99 mm)1.6 mm1,959 mm4Vinyl, card and thin sheet
6 × 5.87 in (152 × 149 mm)2.4 mm2,938 mm2Vinyl, card and thin sheet
8 × 7.82 in (203 × 199 mm)3.3 mm3,918 mm1Any material, including 3 mm wood and acrylic
12 × 11.74 in (305 × 298 mm)4.9 mm5,877 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Bump’s First Christmas SVG files

← Bump’s First Christmas outline lettering All 12 Bump’s First Christmas designs Bump’s First Christmas with a drop shadow →