Free bulldog SVG

Bulldog head in side view SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Bulldog head in side view, as a solid black shape
Bulldog head in side view. The preview is the SVG file itself.

The head and neck alone, seen from the side, on a studded collar: wrinkled brow, a nose set back between the eyes, a hanging lip and the lower jaw out in front. For badges and bottle labels.

What is in the file

Size100 × 91 mm (3.94 × 3.58 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length815 mm at this size
Narrowest part1 mm at this size
Nodes205 curve and line segments
Also found asBulldog profile SVG

Measured from the file. PNG: 2,000 × 1,825 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.91 in (25 × 23 mm)0.25 mm207 mm110Too fine for most machines
2 × 1.82 in (51 × 46 mm)0.51 mm414 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.73 in (76 × 69 mm)0.76 mm621 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.64 in (102 × 92 mm)1 mm828 mm6Vinyl, card and thin sheet
6 × 5.45 in (152 × 139 mm)1.5 mm1,242 mm2Vinyl, card and thin sheet
8 × 7.27 in (203 × 185 mm)2 mm1,656 mm1Vinyl, card and thin sheet
12 × 10.91 in (305 × 277 mm)3 mm2,484 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bulldog SVG files

← Sitting bulldog silhouette All 15 bulldogs Cute bulldog sitting →