Free Bridesmaid SVG

Bridesmaid stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Bridesmaid stencil plate, as a solid black shape
Bridesmaid stencil plate. The preview is the SVG file itself.

A rounded plate with “BRIDESMAID” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 30 mm (3.94 × 1.17 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length775 mm at this size
Narrowest part1.7 mm at this size
Nodes219 curve and line segments

Measured from the file. PNG: 2,000 × 648 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.3 in (25 × 8 mm)0.43 mm197 mm240Too fine for most machines
2 × 0.59 in (51 × 15 mm)0.86 mm394 mm75Fine detail: vinyl and paper only, weed with care
3 × 0.89 in (76 × 23 mm)1.3 mm591 mm33Vinyl, card and thin sheet
4 × 1.19 in (102 × 30 mm)1.7 mm787 mm16Vinyl, card and thin sheet
6 × 1.78 in (152 × 45 mm)2.6 mm1,181 mm6Vinyl, card and thin sheet
8 × 2.38 in (203 × 60 mm)3.5 mm1,575 mm4Any material, including 3 mm wood and acrylic
12 × 3.56 in (305 × 91 mm)5.2 mm2,362 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Bridesmaid SVG files

← Bridesmaid outline lettering All 13 Bridesmaid designs Bridesmaid with a drop shadow →