Free Bridesmaid SVG

Bridesmaid outline lettering SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Bridesmaid outline lettering, drawn as a line
Bridesmaid outline lettering. The preview is the SVG file itself.

“Bridesmaid” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

What is in the file

Size100 × 14 mm (3.94 × 0.55 in), scales to any size
Pieces17 separate pieces
Outlines to cut35: 17 outer edges and 18 cut-outs
Cut length905 mm at this size
Narrowest part1.1 mm at this size
Nodes390 curve and line segments

Measured from the file. PNG: 2,000 × 344 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.14 in (25 × 4 mm)0.28 mm230 mm360Too fine for most machines
2 × 0.28 in (51 × 7 mm)0.56 mm460 mm125Fine detail: vinyl and paper only, weed with care
3 × 0.42 in (76 × 11 mm)0.84 mm690 mm57Fine detail: vinyl and paper only, weed with care
4 × 0.56 in (102 × 14 mm)1.1 mm919 mm32Vinyl, card and thin sheet
6 × 0.83 in (152 × 21 mm)1.7 mm1,379 mm11Vinyl, card and thin sheet
8 × 1.11 in (203 × 28 mm)2.2 mm1,839 mm9Vinyl, card and thin sheet
12 × 1.67 in (305 × 42 mm)3.4 mm2,758 mm6Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Bridesmaid SVG files

← Bridesmaid with hearts All 13 Bridesmaid designs Bridesmaid stencil plate →