Free bride and groom SVG

Bride and groom outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Bride and groom outline, drawn as a line
Bride and groom outline. The preview is the SVG file itself.

The couple arm in arm as a single even line round the pair, about 2 mm wide, with no inner detail. For colouring, foil and engraving on glass.

What is in the file

Size88 × 100 mm (3.46 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length904 mm at this size
Narrowest part1.7 mm at this size
Nodes198 curve and line segments

Measured from the file. PNG: 1,769 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.88 × 1 in (22 × 25 mm)0.43 mm230 mm110Too fine for most machines
1.76 × 2 in (45 × 51 mm)0.86 mm459 mm30Fine detail: vinyl and paper only, weed with care
2.64 × 3 in (67 × 76 mm)1.3 mm689 mm12Vinyl, card and thin sheet
3.52 × 4 in (89 × 102 mm)1.7 mm918 mm6Vinyl, card and thin sheet
5.28 × 6 in (134 × 152 mm)2.6 mm1,378 mm2Vinyl, card and thin sheet
7.04 × 8 in (179 × 203 mm)3.5 mm1,837 mm1Any material, including 3 mm wood and acrylic
10.56 × 12 in (268 × 305 mm)5.2 mm2,755 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bride and groom SVG files

← Bride and groom with a ring for the date All 12 brides and grooms Layered bride and groom on a round backing →