Fishing boat silhouette on the water SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A cabin boat as one shadow: wheelhouse, aerial, three rods standing in their holders, a bow rail and an outboard. One piece on a flat-bottomed strip of water, to stand in a shadow box.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 100 × 61 mm (3.94 × 2.41 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 689 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 119 curve and line segments |
Measured from the file. PNG: 2,000 × 1,252 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.61 in (25 × 16 mm) | 0.53 mm | 175 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.22 in (51 × 31 mm) | 1.1 mm | 350 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.83 in (76 × 47 mm) | 1.6 mm | 525 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.44 in (102 × 62 mm) | 2.1 mm | 700 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.67 in (152 × 93 mm) | 3.2 mm | 1,050 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.89 in (203 × 124 mm) | 4.3 mm | 1,400 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.33 in (305 × 186 mm) | 6.4 mm | 2,100 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More boat SVG files
-
Bass boat with pedestal seats Solid · one piece -
Pontoon boat with a canopy Solid · one piece -
Rowing boat with oars Solid · one piece -
Speed boat throwing spray Solid · one piece -
Shrimp boat with its nets hung up Solid · one piece -
Man fishing in a boat Solid · one piece -
Centre console boat with a hard top Solid · one piece -
Ferry boat with cars on deck Solid · one piece
← Motor boat with an outboard All 17 boats Bass boat with pedestal seats →