Free boat SVG

Man fishing in a boat SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Man fishing in a boat, as a solid black shape
Man fishing in a boat. The preview is the SVG file itself.

A man in a cap sits in a flat-bottomed boat with a small tiller motor, his pole bent over by a fish that has just jumped at the bow. A cool box sits behind him and a tackle box in front.

What is in the file

Size100 × 50 mm (3.94 × 1.98 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length744 mm at this size
Narrowest part1.3 mm at this size
Nodes186 curve and line segments

Measured from the file. PNG: 2,000 × 1,046 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.5 in (25 × 13 mm)0.33 mm189 mm170Too fine for most machines
2 × 1.01 in (51 × 26 mm)0.66 mm378 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.51 in (76 × 38 mm)0.99 mm567 mm21Fine detail: vinyl and paper only, weed with care
4 × 2.02 in (102 × 51 mm)1.3 mm756 mm10Vinyl, card and thin sheet
6 × 3.02 in (152 × 77 mm)2 mm1,134 mm3Vinyl, card and thin sheet
8 × 4.03 in (203 × 102 mm)2.6 mm1,512 mm2Vinyl, card and thin sheet
12 × 6.05 in (305 × 154 mm)4 mm2,268 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More boat SVG files

← Shrimp boat with its nets hung up All 17 boats Centre console boat with a hard top →