Free boat SVG

Boat outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Boat outline, drawn as a line
Boat outline. The preview is the SVG file itself.

The motor boat as an even line: hull, windscreen with its pane, a seat, the outboard and a strip of water that hides the bottom of the hull. For colouring pages, foil and pen plotters.

What is in the file

Size100 × 36 mm (3.94 × 1.43 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length968 mm at this size
Narrowest part2 mm at this size
Nodes314 curve and line segments

Measured from the file. PNG: 2,000 × 777 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.36 in (25 × 9 mm)0.51 mm246 mm210Fine detail: vinyl and paper only, weed with care
2 × 0.73 in (51 × 18 mm)1 mm492 mm65Vinyl, card and thin sheet
3 × 1.09 in (76 × 28 mm)1.5 mm738 mm27Vinyl, card and thin sheet
4 × 1.46 in (102 × 37 mm)2 mm983 mm14Vinyl, card and thin sheet
6 × 2.18 in (152 × 55 mm)3 mm1,475 mm5Any material, including 3 mm wood and acrylic
8 × 2.91 in (203 × 74 mm)4.1 mm1,967 mm3Any material, including 3 mm wood and acrylic
12 × 4.37 in (305 × 111 mm)6.1 mm2,950 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More boat SVG files

← Christmas boat with a tree and lights All 17 boats Layered motor boat in six colours →