Free Blessed to Be Called Grandma SVG

Blessed Grandma in block capitals SVG

Blessed Grandma in block capitals, as a solid black shape
Blessed Grandma in block capitals. The preview is the SVG file itself.

“BLESSED TO BE CALLED GRANDMA” in the tall, narrow capitals of Bebas Neue, with every line stretched to the same width so the words form a solid block. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 81 mm (3.94 × 3.18 in), scales to any size
Pieces24 separate pieces
Outlines to cut36: 24 outer edges and 12 cut-outs
Cut length2,223 mm at this size
Narrowest part2.4 mm at this size
Nodes351 curve and line segments

Measured from the file. PNG: 2,000 × 1,629 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.81 in (25 × 20 mm)0.61 mm565 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.61 in (51 × 41 mm)1.2 mm1,129 mm30Vinyl, card and thin sheet
3 × 2.42 in (76 × 61 mm)1.8 mm1,694 mm12Vinyl, card and thin sheet
4 × 3.23 in (102 × 82 mm)2.4 mm2,259 mm6Vinyl, card and thin sheet
6 × 4.84 in (152 × 123 mm)3.7 mm3,388 mm2Any material, including 3 mm wood and acrylic
8 × 6.46 in (203 × 164 mm)4.9 mm4,517 mm1Any material, including 3 mm wood and acrylic
12 × 9.68 in (305 × 246 mm)7.3 mm6,776 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Blessed to Be Called Grandma SVG files

← Blessed Grandma in Amatic SC All 12 Blessed to Be Called Grandma designs Blessed Grandma in script and capitals →