Free Blessed to Be Called Grandma SVG

Blessed Grandma outline lettering SVG

Blessed Grandma outline lettering, drawn as a line
Blessed Grandma outline lettering. The preview is the SVG file itself.

“Blessed to Be Called Grandma” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 64 mm (3.94 × 2.51 in), scales to any size
Pieces25 separate pieces
Outlines to cut74: 25 outer edges and 49 cut-outs
Cut length2,146 mm at this size
Narrowest part1.4 mm at this size
Nodes771 curve and line segments

Measured from the file. PNG: 2,000 × 1,304 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.64 in (25 × 16 mm)0.36 mm545 mm140Too fine for most machines
2 × 1.28 in (51 × 32 mm)0.71 mm1,090 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.91 in (76 × 49 mm)1.1 mm1,635 mm15Vinyl, card and thin sheet
4 × 2.55 in (102 × 65 mm)1.4 mm2,180 mm8Vinyl, card and thin sheet
6 × 3.83 in (152 × 97 mm)2.1 mm3,271 mm3Vinyl, card and thin sheet
8 × 5.1 in (203 × 130 mm)2.8 mm4,361 mm2Vinyl, card and thin sheet
12 × 7.66 in (305 × 194 mm)4.3 mm6,541 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Blessed to Be Called Grandma SVG files

← Blessed Grandma with hearts All 12 Blessed to Be Called Grandma designs Blessed Grandma stencil plate →