Free Bless This Home SVG

Bless This Home stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Bless This Home stencil plate, as a solid black shape
Bless This Home stencil plate. The preview is the SVG file itself.

A rounded plate with “BLESS THIS HOME” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 67 mm (3.94 × 2.62 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length1,334 mm at this size
Narrowest part1.7 mm at this size
Nodes284 curve and line segments

Measured from the file. PNG: 2,000 × 1,356 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.67 in (25 × 17 mm)0.43 mm339 mm140Too fine for most machines
2 × 1.33 in (51 × 34 mm)0.86 mm678 mm35Fine detail: vinyl and paper only, weed with care
3 × 2 in (76 × 51 mm)1.3 mm1,017 mm15Vinyl, card and thin sheet
4 × 2.66 in (102 × 68 mm)1.7 mm1,355 mm8Vinyl, card and thin sheet
6 × 3.99 in (152 × 101 mm)2.6 mm2,033 mm2Vinyl, card and thin sheet
8 × 5.32 in (203 × 135 mm)3.5 mm2,711 mm2Any material, including 3 mm wood and acrylic
12 × 7.98 in (305 × 203 mm)5.2 mm4,066 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Bless This Home SVG files

← Bless This Home outline lettering All 13 Bless This Home designs Bless This Home with a drop shadow →