Free Bless This Home SVG

Bless This Home in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Bless This Home in Amatic SC, as a solid black shape
Bless This Home in Amatic SC. The preview is the SVG file itself.

“Bless This Home” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 73 mm (3.94 × 2.87 in), scales to any size
Pieces13 separate pieces
Outlines to cut16: 13 outer edges and 3 cut-outs
Cut length1,238 mm at this size
Narrowest part1.1 mm at this size
Nodes404 curve and line segments

Measured from the file. PNG: 2,000 × 1,477 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.73 in (25 × 18 mm)0.28 mm314 mm130Too fine for most machines
2 × 1.46 in (51 × 37 mm)0.56 mm629 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.18 in (76 × 55 mm)0.84 mm943 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.91 in (102 × 74 mm)1.1 mm1,258 mm6Vinyl, card and thin sheet
6 × 4.37 in (152 × 111 mm)1.7 mm1,887 mm2Vinyl, card and thin sheet
8 × 5.82 in (203 × 148 mm)2.2 mm2,516 mm2Vinyl, card and thin sheet
12 × 8.74 in (305 × 222 mm)3.4 mm3,773 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Bless This Home SVG files

← Bless This Home in Alfa Slab One All 13 Bless This Home designs Bless This Home in block capitals →