Free bird SVG

Flying bird with raised wings SVG

Flying bird with raised wings, as a solid black shape
Flying bird with raised wings. The preview is the SVG file itself.

A bird in level flight seen from the side: one wing raised with three feather slits, the tip of the other showing behind the head, and a forked tail.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 88 mm (3.94 × 3.46 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length589 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes125 curve and line segments

Measured from the file. PNG: 2,000 × 1,769 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.88 in (25 × 22 mm)Over 1.5 mm150 mm110Vinyl, card and thin sheet
2 × 1.76 in (51 × 45 mm)Over 3 mm299 mm30Any material, including 3 mm wood and acrylic
3 × 2.64 in (76 × 67 mm)Over 4.6 mm449 mm12Any material, including 3 mm wood and acrylic
4 × 3.52 in (102 × 89 mm)Over 6.1 mm598 mm6Any material, including 3 mm wood and acrylic
6 × 5.28 in (152 × 134 mm)Over 9.1 mm898 mm2Any material, including 3 mm wood and acrylic
8 × 7.04 in (203 × 179 mm)Over 12 mm1,197 mm1Any material, including 3 mm wood and acrylic
12 × 10.56 in (305 × 268 mm)Over 18 mm1,795 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bird SVG files

← Birds on a wire All 16 birds Swallow in flight →