Free bird SVG

Sparrow on a berry twig SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Sparrow on a berry twig, as a solid black shape
Sparrow on a berry twig. The preview is the SVG file itself.

A stocky sparrow with a short thick beak, a notched tail and three bars on its wing, on a twig with berries. A good autumn and winter bird.

What is in the file

Size100 × 71 mm (3.94 × 2.8 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length763 mm at this size
Narrowest part1.1 mm at this size
Nodes159 curve and line segments

Measured from the file. PNG: 2,000 × 1,444 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.71 in (25 × 18 mm)0.28 mm194 mm130Too fine for most machines
2 × 1.42 in (51 × 36 mm)0.56 mm388 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.13 in (76 × 54 mm)0.84 mm581 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.84 in (102 × 72 mm)1.1 mm775 mm8Vinyl, card and thin sheet
6 × 4.27 in (152 × 108 mm)1.7 mm1,163 mm2Vinyl, card and thin sheet
8 × 5.69 in (203 × 144 mm)2.2 mm1,550 mm2Vinyl, card and thin sheet
12 × 8.53 in (305 × 217 mm)3.4 mm2,326 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bird SVG files

← Bluebird on a blossom twig All 16 birds Singing bird with an open beak →