Free Bestie SVG

Bestie in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Bestie in Alfa Slab One, as a solid black shape
Bestie in Alfa Slab One. The preview is the SVG file itself.

“Bestie” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 24 mm (3.94 × 0.96 in), scales to any size
Pieces7 separate pieces
Outlines to cut11: 7 outer edges and 4 cut-outs
Cut length548 mm at this size
Narrowest part3.4 mm at this size
Nodes119 curve and line segments

Measured from the file. PNG: 2,000 × 546 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.24 in (25 × 6 mm)0.86 mm139 mm270Fine detail: vinyl and paper only, weed with care
2 × 0.49 in (51 × 12 mm)1.7 mm278 mm85Vinyl, card and thin sheet
3 × 0.73 in (76 × 19 mm)2.6 mm418 mm39Vinyl, card and thin sheet
4 × 0.98 in (102 × 25 mm)3.5 mm557 mm20Any material, including 3 mm wood and acrylic
6 × 1.46 in (152 × 37 mm)5.2 mm835 mm7Any material, including 3 mm wood and acrylic
8 × 1.95 in (203 × 50 mm)6.9 mm1,114 mm5Any material, including 3 mm wood and acrylic
12 × 2.93 in (305 × 74 mm)10 mm1,670 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Bestie SVG files

← Bestie in Lilita One All 13 Bestie designs Bestie in Amatic SC →