Free Believe SVG

Believe in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Believe in Lilita One, as a solid black shape
Believe in Lilita One. The preview is the SVG file itself.

“Believe” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 24 mm (3.94 × 0.93 in), scales to any size
Pieces8 separate pieces
Outlines to cut13: 8 outer edges and 5 cut-outs
Cut length525 mm at this size
Narrowest part3.6 mm at this size
Nodes139 curve and line segments

Measured from the file. PNG: 2,000 × 533 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.24 in (25 × 6 mm)0.91 mm133 mm270Fine detail: vinyl and paper only, weed with care
2 × 0.47 in (51 × 12 mm)1.8 mm267 mm90Vinyl, card and thin sheet
3 × 0.71 in (76 × 18 mm)2.7 mm400 mm39Vinyl, card and thin sheet
4 × 0.95 in (102 × 24 mm)3.7 mm533 mm20Any material, including 3 mm wood and acrylic
6 × 1.42 in (152 × 36 mm)5.5 mm800 mm7Any material, including 3 mm wood and acrylic
8 × 1.9 in (203 × 48 mm)7.3 mm1,067 mm5Any material, including 3 mm wood and acrylic
12 × 2.84 in (305 × 72 mm)11 mm1,600 mm4Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Believe SVG files

← Believe in Kaushan Script All 13 Believe designs Believe in Alfa Slab One →