Free Believe SVG

Believe with a swash underline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Believe with a swash underline, as a solid black shape
Believe with a swash underline. The preview is the SVG file itself.

“Believe” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.

What is in the file

Size100 × 40 mm (3.94 × 1.56 in), scales to any size
Pieces4 separate pieces
Outlines to cut8: 4 outer edges and 4 cut-outs
Cut length815 mm at this size
Narrowest part2.5 mm at this size
Nodes201 curve and line segments

Measured from the file. PNG: 2,000 × 838 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.4 in (25 × 10 mm)0.64 mm207 mm200Fine detail: vinyl and paper only, weed with care
2 × 0.79 in (51 × 20 mm)1.3 mm414 mm60Vinyl, card and thin sheet
3 × 1.19 in (76 × 30 mm)1.9 mm621 mm24Vinyl, card and thin sheet
4 × 1.58 in (102 × 40 mm)2.5 mm828 mm12Vinyl, card and thin sheet
6 × 2.38 in (152 × 60 mm)3.8 mm1,242 mm4Any material, including 3 mm wood and acrylic
8 × 3.17 in (203 × 80 mm)5.1 mm1,656 mm3Any material, including 3 mm wood and acrylic
12 × 4.75 in (305 × 121 mm)7.6 mm2,484 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Believe SVG files

← Believe in block capitals All 13 Believe designs Believe with stars →