Believe in the Magic with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Believe in the Magic of Christmas” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 78 mm (3.94 × 3.09 in), scales to any size |
|---|---|
| Pieces | 16 separate pieces |
| Outlines to cut | 38: 16 outer edges and 22 cut-outs |
| Cut length | 2,378 mm at this size |
| Narrowest part | 3.7 mm at this size |
| Nodes | 898 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,585 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.78 in (25 × 20 mm) | 0.94 mm | 604 mm | 120 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.57 in (51 × 40 mm) | 1.9 mm | 1,208 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.35 in (76 × 60 mm) | 2.8 mm | 1,812 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.14 in (102 × 80 mm) | 3.8 mm | 2,416 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.7 in (152 × 119 mm) | 5.6 mm | 3,624 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.27 in (203 × 159 mm) | 7.5 mm | 4,832 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.41 in (305 × 239 mm) | 11 mm | 7,248 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Believe in the Magic of Christmas SVG files
-
Believe in the Magic with a sprig of holly Solid · 25 pieces
-
Believe in the Magic in Pacifico Solid · 10 pieces
-
Believe in the Magic in Lobster Solid · 6 pieces
-
Believe in the Magic in Kaushan Script Solid · 32 pieces
-
Believe in the Magic in Lilita One Solid · 32 pieces
-
Believe in the Magic in Alfa Slab One Solid · 32 pieces
-
Believe in the Magic in Amatic SC Solid · 28 pieces
-
Believe in the Magic in block capitals Solid · 28 pieces
← Believe in the Magic stencil plate All 13 Believe in the Magic of Christmas designs Believe in the Magic with a sprig of holly →