Believe in the Magic in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Believe in the Magic of Christmas” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 55 mm (3.94 × 2.17 in), scales to any size |
|---|---|
| Pieces | 32 separate pieces |
| Outlines to cut | 42: 32 outer edges and 10 cut-outs |
| Cut length | 1,266 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 506 curve and line segments |
Measured from the file. PNG: 2,000 × 1,135 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.55 in (25 × 14 mm) | 0.51 mm | 322 mm | 160 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.1 in (51 × 28 mm) | 1 mm | 643 mm | 45 | Vinyl, card and thin sheet |
| 3 × 1.65 in (76 × 42 mm) | 1.5 mm | 965 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.2 in (102 × 56 mm) | 2 mm | 1,286 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.3 in (152 × 84 mm) | 3 mm | 1,929 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.4 in (203 × 112 mm) | 4.1 mm | 2,573 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.6 in (305 × 168 mm) | 6.1 mm | 3,859 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Believe in the Magic of Christmas SVG files
-
Believe in the Magic in Alfa Slab One Solid · 32 pieces
-
Believe in the Magic in Amatic SC Solid · 28 pieces
-
Believe in the Magic in block capitals Solid · 28 pieces
-
Believe in the Magic in script and capitals Solid · 24 pieces
-
Believe in the Magic with stars Solid · 12 pieces
-
Believe in the Magic outline lettering Outline · 32 pieces
-
Believe in the Magic stencil plate Solid · one piece
-
Believe in the Magic with a drop shadow Layered · 16 pieces
← Believe in the Magic in Kaushan Script All 13 Believe in the Magic of Christmas designs Believe in the Magic in Alfa Slab One →