Be a Mermaid, Make Waves with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Be a Mermaid and Make Waves” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 69 mm (3.94 × 2.7 in), scales to any size |
|---|---|
| Pieces | 12 separate pieces |
| Outlines to cut | 30: 12 outer edges and 18 cut-outs |
| Cut length | 1,920 mm at this size |
| Narrowest part | 1.4 mm at this size |
| Nodes | 775 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,398 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.69 in (25 × 17 mm) | 0.36 mm | 488 mm | 130 | Too fine for most machines |
| 2 × 1.37 in (51 × 35 mm) | 0.71 mm | 975 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.06 in (76 × 52 mm) | 1.1 mm | 1,463 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.75 in (102 × 70 mm) | 1.4 mm | 1,951 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4.12 in (152 × 105 mm) | 2.1 mm | 2,926 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.5 in (203 × 140 mm) | 2.8 mm | 3,901 mm | 2 | Vinyl, card and thin sheet |
| 12 × 8.24 in (305 × 209 mm) | 4.3 mm | 5,852 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Be a Mermaid and Make Waves SVG files
-
Be a Mermaid, Make Waves with a mermaid’s tail Solid · 18 pieces
-
Be a Mermaid, Make Waves in Pacifico Solid · 8 pieces
-
Be a Mermaid, Make Waves in Lobster Solid · 13 pieces
-
Be a Mermaid, Make Waves in Kaushan Script Solid · 18 pieces
-
Be a Mermaid, Make Waves in Lilita One Solid · 23 pieces
-
Be a Mermaid, Make Waves in Alfa Slab One Solid · 23 pieces
-
Be a Mermaid, Make Waves in Amatic SC Solid · 22 pieces
-
Be a Mermaid, Make Waves in block capitals Solid · 22 pieces
← Be a Mermaid, Make Waves stencil plate All 13 Be a Mermaid and Make Waves designs Be a Mermaid, Make Waves with a mermaid’s tail →