Be a Mermaid, Make Waves in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Be a Mermaid and Make Waves” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 50 mm (3.94 × 1.96 in), scales to any size |
|---|---|
| Pieces | 23 separate pieces |
| Outlines to cut | 36: 23 outer edges and 13 cut-outs |
| Cut length | 1,040 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 439 curve and line segments |
Measured from the file. PNG: 2,000 × 1,033 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.5 in (25 × 13 mm) | 0.46 mm | 264 mm | 170 | Too fine for most machines |
| 2 × 0.99 in (51 × 25 mm) | 0.91 mm | 528 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.49 in (76 × 38 mm) | 1.4 mm | 792 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.99 in (102 × 50 mm) | 1.8 mm | 1,057 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.98 in (152 × 76 mm) | 2.7 mm | 1,585 mm | 3 | Vinyl, card and thin sheet |
| 8 × 3.98 in (203 × 101 mm) | 3.7 mm | 2,113 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 5.96 in (305 × 151 mm) | 5.5 mm | 3,170 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Be a Mermaid and Make Waves SVG files
-
Be a Mermaid, Make Waves in Alfa Slab One Solid · 23 pieces
-
Be a Mermaid, Make Waves in Amatic SC Solid · 22 pieces
-
Be a Mermaid, Make Waves in block capitals Solid · 22 pieces
-
Be a Mermaid, Make Waves in script and capitals Solid · 17 pieces
-
Be a Mermaid, Make Waves with stars Solid · 19 pieces
-
Be a Mermaid, Make Waves outline lettering Outline · 23 pieces
-
Be a Mermaid, Make Waves stencil plate Solid · one piece
-
Be a Mermaid, Make Waves with a drop shadow Layered · 12 pieces
← Be a Mermaid, Make Waves in Kaushan Script All 13 Be a Mermaid and Make Waves designs Be a Mermaid, Make Waves in Alfa Slab One →