Free basketball SVG

Split basketball for a name SVG

Split basketball for a name, as a solid black shape
Split basketball for a name. The preview is the SVG file itself.

The ball cut in two with a clear band across the middle in place of the level seam, where a name goes. It comes as two pieces, top and bottom.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size98 × 100 mm (3.86 × 3.94 in), scales to any size
Pieces2 separate pieces
Outlines to cut2 outlines
Cut length811 mm at this size
Narrowest part3.6 mm at this size
Nodes40 curve and line segments
Symmetry2-fold rotation and mirror

Measured from the file. PNG: 1,962 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.98 × 1 in (25 × 25 mm)0.91 mm206 mm100Fine detail: vinyl and paper only, weed with care
1.96 × 2 in (50 × 51 mm)1.8 mm412 mm25Vinyl, card and thin sheet
2.94 × 3 in (75 × 76 mm)2.7 mm618 mm9Vinyl, card and thin sheet
3.92 × 4 in (100 × 102 mm)3.7 mm824 mm4Any material, including 3 mm wood and acrylic
5.88 × 6 in (149 × 152 mm)5.5 mm1,236 mm2Any material, including 3 mm wood and acrylic
7.84 × 8 in (199 × 203 mm)7.3 mm1,648 mm1Any material, including 3 mm wood and acrylic
11.76 × 12 in (299 × 305 mm)11 mm2,472 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More basketball SVG files

← Half basketball All 20 basketballs Heart-shaped basketball →