Banana outline SVG
A banana drawn as a line about 2 mm wide, with the ridge along its length and the stalk and nub marked off by short lines. For colouring pages, embroidery and pen plotting.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 60 mm (3.94 × 2.35 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 4: 1 outer edge and 3 cut-outs |
| Cut length | 703 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 98 curve and line segments |
Measured from the file. PNG: 2,000 × 1,223 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.6 in (25 × 15 mm) | 0.46 mm | 179 mm | 150 | Too fine for most machines |
| 2 × 1.19 in (51 × 30 mm) | 0.91 mm | 357 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.79 in (76 × 45 mm) | 1.4 mm | 536 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.38 in (102 × 61 mm) | 1.8 mm | 714 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.58 in (152 × 91 mm) | 2.7 mm | 1,071 mm | 3 | Vinyl, card and thin sheet |
| 8 × 4.77 in (203 × 121 mm) | 3.7 mm | 1,428 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.15 in (305 × 182 mm) | 5.5 mm | 2,143 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Bunch of bananas 
Two bananas 
Peeled banana 
Banana peel 
Cute banana with a face 
Two crossed bananas 
Banana monogram frame 
Banana split sundae 