Free balloon SVG

Balloon dog SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Balloon dog, as a solid black shape
Balloon dog. The preview is the SVG file itself.

A balloon animal twisted from one long balloon: a body, four legs, a neck, a snout, two ears and a tail with a little tip, each a fat sausage pinched where it joins the next.

What is in the file

Size100 × 96 mm (3.94 × 3.78 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length596 mm at this size
Narrowest part1.7 mm at this size
Nodes107 curve and line segments

Measured from the file. PNG: 2,000 × 1,923 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.96 in (25 × 24 mm)0.43 mm151 mm100Too fine for most machines
2 × 1.92 in (51 × 49 mm)0.86 mm303 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.88 in (76 × 73 mm)1.3 mm454 mm9Vinyl, card and thin sheet
4 × 3.84 in (102 × 98 mm)1.7 mm606 mm6Vinyl, card and thin sheet
6 × 5.76 in (152 × 146 mm)2.6 mm908 mm2Vinyl, card and thin sheet
8 × 7.68 in (203 × 195 mm)3.5 mm1,211 mm1Any material, including 3 mm wood and acrylic
12 × 11.52 in (305 × 293 mm)5.2 mm1,817 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More balloon SVG files

← Star balloon All 13 balloons Hot air balloon →