Free ballet SVG

Ballet dancer in a ring of stars SVG

Ballet dancer in a ring of stars, as a solid black shape
Ballet dancer in a ring of stars. The preview is the SVG file itself.

The dancer on pointe in fifth position, standing on a strip of stage inside a ring, with two stars set into the ring on each side. Exactly mirrored: a round badge for a recital shirt or a studio door.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length1,035 mm at this size
Narrowest part2.7 mm at this size
Nodes178 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.69 mm263 mm100Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)1.4 mm526 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)2.1 mm789 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)2.7 mm1,052 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)4.1 mm1,577 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)5.5 mm2,103 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)8.2 mm3,155 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ballet SVG files

← Ballet dancer in attitude All 15 ballet designs Tiny dancer in a ballet tutu →