Free ballet SVG

Ballet shoes outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Ballet shoes outline, drawn as a line
Ballet shoes outline. The preview is the SVG file itself.

The hanging pair as an even line: each shoe with its opening and the seam of its toe, the ribbons and a bow of two loops. Exactly mirrored. For colouring, foil and pen plotters.

What is in the file

Size59 × 100 mm (2.33 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length1,337 mm at this size
Narrowest part1.7 mm at this size
Nodes237 curve and line segments
SymmetryMirror
Also found asBallerina shoes SVG

Measured from the file. PNG: 1,217 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.59 × 1 in (15 × 25 mm)0.43 mm340 mm150Too fine for most machines
1.19 × 2 in (30 × 51 mm)0.86 mm679 mm40Fine detail: vinyl and paper only, weed with care
1.78 × 3 in (45 × 76 mm)1.3 mm1,019 mm18Vinyl, card and thin sheet
2.37 × 4 in (60 × 102 mm)1.7 mm1,358 mm8Vinyl, card and thin sheet
3.56 × 6 in (90 × 152 mm)2.6 mm2,038 mm3Vinyl, card and thin sheet
4.74 × 8 in (120 × 203 mm)3.5 mm2,717 mm2Any material, including 3 mm wood and acrylic
7.12 × 12 in (181 × 305 mm)5.2 mm4,075 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ballet SVG files

← Ballet pointe shoe with ribbons All 15 ballet designs Ballet shoes monogram frame →