Free Back to School SVG

Back to School stencil plate SVG

Back to School stencil plate, as a solid black shape
Back to School stencil plate. The preview is the SVG file itself.

A rounded plate with “BACK TO SCHOOL” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 65 mm (3.94 × 2.57 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut13: 1 outer edge and 12 cut-outs
Cut length1,343 mm at this size
Narrowest part1 mm at this size
Nodes198 curve and line segments

Measured from the file. PNG: 2,000 × 1,335 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.65 in (25 × 17 mm)0.25 mm341 mm140Too fine for most machines
2 × 1.31 in (51 × 33 mm)0.51 mm682 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.96 in (76 × 50 mm)0.76 mm1,023 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.62 in (102 × 66 mm)1 mm1,364 mm8Vinyl, card and thin sheet
6 × 3.92 in (152 × 100 mm)1.5 mm2,047 mm2Vinyl, card and thin sheet
8 × 5.23 in (203 × 133 mm)2 mm2,729 mm2Vinyl, card and thin sheet
12 × 7.85 in (305 × 199 mm)3 mm4,093 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Back to School SVG files

← Back to School outline lettering All 12 Back to School designs Back to School with a drop shadow →