Free Back to School SVG

Back to School in Amatic SC SVG

Back to School in Amatic SC, as a solid black shape
Back to School in Amatic SC. The preview is the SVG file itself.

“Back to School” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 97 mm (3.94 × 3.81 in), scales to any size
Pieces12 separate pieces
Outlines to cut18: 12 outer edges and 6 cut-outs
Cut length1,598 mm at this size
Narrowest part1.5 mm at this size
Nodes499 curve and line segments

Measured from the file. PNG: 2,000 × 1,938 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.97 in (25 × 25 mm)0.38 mm406 mm100Too fine for most machines
2 × 1.94 in (51 × 49 mm)0.76 mm812 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.9 in (76 × 74 mm)1.1 mm1,218 mm9Vinyl, card and thin sheet
4 × 3.87 in (102 × 98 mm)1.5 mm1,624 mm4Vinyl, card and thin sheet
6 × 5.81 in (152 × 148 mm)2.3 mm2,435 mm2Vinyl, card and thin sheet
8 × 7.74 in (203 × 197 mm)3 mm3,247 mm1Any material, including 3 mm wood and acrylic
12 × 11.62 in (305 × 295 mm)4.6 mm4,871 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Back to School SVG files

← Back to School in Alfa Slab One All 12 Back to School designs Back to School in block capitals →