Free astronaut SVG

Layered astronaut in four colours SVG

Layered astronaut in four colours, in layered colours
Layered astronaut in four colours. The preview is the SVG file itself.

Four layers to stack: a white suit, grey gloves, boots and collar, a dark blue visor and an orange chest panel. Raise the visor on a foam pad to make the helmet look domed.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size70 × 100 mm (2.76 × 3.94 in), scales to any size
Pieces9 separate pieces
Outlines to cut9 outlines
Cut length885 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes162 curve and line segments
Layers4: suit, trim, visor and panel

Measured from the file. PNG: 1,425 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.7 × 1 in (18 × 25 mm)Over 1.5 mm225 mm130Vinyl, card and thin sheet
1.4 × 2 in (36 × 51 mm)Over 3 mm450 mm35Any material, including 3 mm wood and acrylic
2.1 × 3 in (53 × 76 mm)Over 4.6 mm674 mm15Any material, including 3 mm wood and acrylic
2.8 × 4 in (71 × 102 mm)Over 6.1 mm899 mm8Any material, including 3 mm wood and acrylic
4.21 × 6 in (107 × 152 mm)Over 9.1 mm1,349 mm2Any material, including 3 mm wood and acrylic
5.61 × 8 in (142 × 203 mm)Over 12 mm1,798 mm2Any material, including 3 mm wood and acrylic
8.41 × 12 in (214 × 305 mm)Over 18 mm2,697 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More astronaut SVG files

← Astronaut outline All 12 astronauts Astronaut in a space suit →