Free Argentina SVG

Split Argentina for a name SVG

Split Argentina for a name, as a solid black shape — Split Argentina for a name. The preview is the SVG file itself.

Argentina divided by a clear band 18 mm tall across its broadest part, for a family name, a town or a date set between the two halves. The halves of Argentina are loose pieces: line them up with transfer tape.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	47 × 100 mm (1.83 × 3.94 in), scales to any size
Pieces	3 separate pieces
Outlines to cut	3 outlines
Cut length	315 mm at this size
Narrowest part	1.7 mm at this size
Nodes	300 curve and line segments

Measured from the file. PNG: 973 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.47 × 1 in (12 × 25 mm)	0.43 mm	80 mm	180	Too fine for most machines
0.93 × 2 in (24 × 51 mm)	0.86 mm	160 mm	50	Fine detail: vinyl and paper only, weed with care
1.4 × 3 in (36 × 76 mm)	1.3 mm	240 mm	21	Vinyl, card and thin sheet
1.86 × 4 in (47 × 102 mm)	1.7 mm	320 mm	10	Vinyl, card and thin sheet
2.8 × 6 in (71 × 152 mm)	2.6 mm	480 mm	4	Vinyl, card and thin sheet
3.73 × 8 in (95 × 203 mm)	3.5 mm	640 mm	3	Any material, including 3 mm wood and acrylic
5.59 × 12 in (142 × 305 mm)	5.2 mm	960 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Argentina SVG files

← Argentina with its name beneath All 10 Argentina designs Argentina in stripes →