Free Argentina SVG

Argentina with its name beneath SVG

Argentina with its name beneath, as a solid black shape — Argentina with its name beneath. The preview is the SVG file itself.

The solid shape of Argentina with “ARGENTINA” in narrow capitals under it. The letters of “Argentina” are loose pieces, so use transfer tape to keep their spacing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	57 × 100 mm (2.24 × 3.94 in), scales to any size
Pieces	11 separate pieces
Outlines to cut	14: 11 outer edges and 3 cut-outs
Cut length	639 mm at this size
Narrowest part	1.9 mm at this size
Nodes	499 curve and line segments

Measured from the file. PNG: 1,171 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.57 × 1 in (14 × 25 mm)	0.48 mm	162 mm	150	Too fine for most machines
1.14 × 2 in (29 × 51 mm)	0.97 mm	325 mm	45	Fine detail: vinyl and paper only, weed with care
1.71 × 3 in (43 × 76 mm)	1.4 mm	487 mm	18	Vinyl, card and thin sheet
2.28 × 4 in (58 × 102 mm)	1.9 mm	649 mm	8	Vinyl, card and thin sheet
3.41 × 6 in (87 × 152 mm)	2.9 mm	974 mm	3	Vinyl, card and thin sheet
4.55 × 8 in (116 × 203 mm)	3.9 mm	1,298 mm	2	Any material, including 3 mm wood and acrylic
6.83 × 12 in (173 × 305 mm)	5.8 mm	1,948 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Argentina SVG files

← Argentina cut from a heart All 10 Argentina designs Split Argentina for a name →