Free America SVG

America with a waving flag SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

America with a waving flag. The preview is the SVG file itself.

“America” with a waving flag above the words, which are set in Lobster. The picture is a separate piece, so it can be cut in a second colour or left off.

What is in the file

Size	100 × 74 mm (3.94 × 2.89 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	8: 5 outer edges and 3 cut-outs
Cut length	723 mm at this size
Narrowest part	1.2 mm at this size
Nodes	161 curve and line segments

Measured from the file. PNG: 2,000 × 1,490 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.74 in (25 × 19 mm)	0.3 mm	184 mm	130	Too fine for most machines
2 × 1.47 in (51 × 37 mm)	0.61 mm	367 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.2 in (76 × 56 mm)	0.91 mm	551 mm	15	Fine detail: vinyl and paper only, weed with care
4 × 2.94 in (102 × 75 mm)	1.2 mm	735 mm	6	Vinyl, card and thin sheet
6 × 4.41 in (152 × 112 mm)	1.8 mm	1,102 mm	2	Vinyl, card and thin sheet
8 × 5.88 in (203 × 149 mm)	2.4 mm	1,469 mm	2	Vinyl, card and thin sheet
12 × 8.82 in (305 × 224 mm)	3.7 mm	2,204 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More America SVG files

← America with a drop shadow All 13 America designs America in Pacifico →