Free America SVG

America in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

America in Amatic SC, as a solid black shape
America in Amatic SC. The preview is the SVG file itself.

“America” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 36 mm (3.94 × 1.42 in), scales to any size
Pieces7 separate pieces
Outlines to cut10: 7 outer edges and 3 cut-outs
Cut length873 mm at this size
Narrowest part2 mm at this size
Nodes277 curve and line segments

Measured from the file. PNG: 2,000 × 769 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.36 in (25 × 9 mm)0.51 mm222 mm210Fine detail: vinyl and paper only, weed with care
2 × 0.72 in (51 × 18 mm)1 mm443 mm65Vinyl, card and thin sheet
3 × 1.08 in (76 × 27 mm)1.5 mm665 mm27Vinyl, card and thin sheet
4 × 1.44 in (102 × 37 mm)2 mm887 mm14Vinyl, card and thin sheet
6 × 2.16 in (152 × 55 mm)3 mm1,330 mm5Any material, including 3 mm wood and acrylic
8 × 2.88 in (203 × 73 mm)4.1 mm1,774 mm3Any material, including 3 mm wood and acrylic
12 × 4.32 in (305 × 110 mm)6.1 mm2,661 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More America SVG files

← America in Alfa Slab One All 13 America designs America in block capitals →