Free Africa SVG

Africa in stripes SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Africa in stripes, as a solid black shape
Africa in stripes. The preview is the SVG file itself.

Africa drawn as bands 5 mm tall with 3 mm between them. Cut the bands in one colour and lay them over the solid shape of Africa in another; the bands are loose pieces.

What is in the file

Size94 × 100 mm (3.71 × 3.94 in), scales to any size
Pieces15 separate pieces
Outlines to cut15 outlines
Cut length1,379 mm at this size
Narrowest part1.6 mm at this size
Nodes275 curve and line segments

Measured from the file. PNG: 1,890 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.94 × 1 in (24 × 25 mm)0.41 mm350 mm100Too fine for most machines
1.89 × 2 in (48 × 51 mm)0.81 mm701 mm25Fine detail: vinyl and paper only, weed with care
2.83 × 3 in (72 × 76 mm)1.2 mm1,051 mm12Vinyl, card and thin sheet
3.77 × 4 in (96 × 102 mm)1.6 mm1,401 mm6Vinyl, card and thin sheet
5.66 × 6 in (144 × 152 mm)2.4 mm2,102 mm2Vinyl, card and thin sheet
7.54 × 8 in (192 × 203 mm)3.3 mm2,802 mm1Any material, including 3 mm wood and acrylic
11.32 × 12 in (287 × 305 mm)4.9 mm4,203 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Africa SVG files

← Split Africa for a name All 10 Africa designs Layered Africa on an octagon →