Free Africa SVG

Split Africa for a name SVG

Split Africa for a name, as a solid black shape
Split Africa for a name. The preview is the SVG file itself.

Africa divided by a clear band 18 mm tall across its broadest part, for a family name, a town or a date set between the two halves. The halves of Africa are loose pieces: line them up with transfer tape.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size91 × 100 mm (3.6 × 3.94 in), scales to any size
Pieces3 separate pieces
Outlines to cut3 outlines
Cut length424 mm at this size
Narrowest part5.3 mm at this size
Nodes332 curve and line segments

Measured from the file. PNG: 1,835 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.91 × 1 in (23 × 25 mm)1.3 mm108 mm100Vinyl, card and thin sheet
1.83 × 2 in (46 × 51 mm)2.7 mm215 mm30Vinyl, card and thin sheet
2.74 × 3 in (70 × 76 mm)4 mm323 mm12Any material, including 3 mm wood and acrylic
3.66 × 4 in (93 × 102 mm)5.4 mm431 mm6Any material, including 3 mm wood and acrylic
5.48 × 6 in (139 × 152 mm)8.1 mm646 mm2Any material, including 3 mm wood and acrylic
7.31 × 8 in (186 × 203 mm)11 mm862 mm1Any material, including 3 mm wood and acrylic
10.97 × 12 in (279 × 305 mm)16 mm1,292 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Africa SVG files

← Africa with its name beneath All 10 Africa designs Africa in stripes →