Nativity shadow box SVG
The stable under the star, with the holy family inside, shepherds and their sheep on one side, the three kings arriving on the other, and Bethlehem on the far hill. 5 sheets of card, cut and stacked with a gap between each, make the picture. The files are free, and every part of the scene can be moved, swapped or resized below before you download.
5 sheets at 8 × 8 in, zipped, with a note on putting them together.
Free for personal and commercial use, no sign-up. What you can do with it.
The 5 sheets
Sheet 1 is the back and sheet 5 is the front. Each one is a single piece with the same frame round its edge, so they line up when stacked. The colours shown are the “Lit from behind” set; cut them in any card you like.
| Sheet | What is on it | Narrowest part | Seen from the front |
|---|---|---|---|
| 1. Star | A whole sheet with holes for: North star and 6 × Plain disc | over 2 mm | 40% |
| 2. Bethlehem | Rolling ground, with: Nativity town of Bethlehem, Straight palm tree silhouette and Palm tree with coconuts | 1 mm | 10% |
| 3. Kings | Rolling ground, with: Nativity wise men on camels and Leaning palm tree | 1 mm | 9% |
| 4. Stable | Rolling ground, with: Nativity silhouette in a stable | over 2 mm | 12% |
| 5. Shepherds | A gentle slope, with: Nativity shepherd with sheep, Nativity manger scene with sheep and Bunch of grass | 0.9 mm | 29% |
Measured from the files at 8 × 8 in. The narrowest part is the thinnest neck of card that holds anything on; sharp tips are not counted. “Seen from the front” is the share of the picture that sheet fills once the sheets in front of it are in place.
Will it cut at your size?
The download is 8 × 8 in. The scene maker above makes the same scene at any of these sizes; the thinnest part scales with it.
| Frame opening | Each sheet | Narrowest part | Depth needed | Fits a 12 × 12 in mat | Rule of thumb |
|---|---|---|---|---|---|
| 6 × 6 in | 152.4 × 152.4 mm | 0.7 mm | 17 mm | Yes | Fine detail: sharp blade, slow speed |
| 20 × 20 cm | 200 × 200 mm | 0.9 mm | 17 mm | Yes | Fine detail: sharp blade, slow speed |
| 8 × 8 in | 203.2 × 203.2 mm | 0.9 mm | 17 mm | Yes | Fine detail: sharp blade, slow speed |
| 23 × 23 cm | 230 × 230 mm | 1 mm | 17 mm | Yes | Cuts easily |
| 25 × 25 cm | 250 × 250 mm | 1.1 mm | 17 mm | Yes | Cuts easily |
Depth needed allows 3 mm of foam between sheets and 5 mm for the card itself and the backing.
Making this one
Made in white card and lit from behind, the star and the town’s windows shine. The kings’ crowns and staffs are fine: cut that sheet slowly.
- Cut all 5 sheets from 160 to 220 gsm card at the same size.
- Lay them out in order, sheet 1 at the back.
- Put strips of 3 mm foam tape round the border of sheet 1 and press sheet 2 onto it with the edges level. Carry on to sheet 5.
- Fit the stack into a deep frame with the front sheet against the glass. For a light box, run a strip of warm white LEDs round the inside of the frame behind the stack.
The zip includes these steps as a text file, each sheet as its own SVG and all 5 side by side in one SVG. More on paper, frames and lights is on the shadow box page.
The parts, on their own
Everything in the scene comes from the free SVG library, where each has its own page and file:
Questions
Where does the star go?
It is a hole in the back sheet, directly above the stable roof, so the brightest light in the box falls on the manger.
Can I sell boxes I make with it?
Yes. Finished pieces are yours to sell. The files themselves may not be sold or shared; send people to this page. See the licence.
Unicorn castle 
Butterfly garden 
Winter cabin 
Wolf and moon 
Lighthouse beach 
Fairy garden