Free zebra SVG

Zebra face outline SVG

Zebra face outline, drawn as a line — Zebra face outline. The preview is the SVG file itself.

The zebra face as a line drawing, with every stripe drawn as an outline to colour in or leave white, and a line across the muzzle. For colouring pages, foil, engraving and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	50 × 100 mm (1.96 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	25: 1 outer edge and 24 cut-outs
Cut length	1,803 mm at this size
Narrowest part	1.5 mm at this size
Nodes	861 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,035 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.5 × 1 in (13 × 25 mm)	0.38 mm	458 mm	170	Too fine for most machines
1 × 2 in (25 × 51 mm)	0.76 mm	916 mm	50	Fine detail: vinyl and paper only, weed with care
1.49 × 3 in (38 × 76 mm)	1.1 mm	1,374 mm	21	Vinyl, card and thin sheet
1.99 × 4 in (51 × 102 mm)	1.5 mm	1,832 mm	10	Vinyl, card and thin sheet
2.99 × 6 in (76 × 152 mm)	2.3 mm	2,748 mm	3	Vinyl, card and thin sheet
3.98 × 8 in (101 × 203 mm)	3 mm	3,664 mm	2	Any material, including 3 mm wood and acrylic
5.98 × 12 in (152 × 305 mm)	4.6 mm	5,496 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More zebra SVG files

← Zebra under an acacia tree All 10 zebras Zebra with stripes →