Peanut Butter to My Jelly in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“You’re the Peanut Butter to My Jelly” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 52 mm (3.94 × 2.04 in), scales to any size |
|---|---|
| Pieces | 30 separate pieces |
| Outlines to cut | 41: 30 outer edges and 11 cut-outs |
| Cut length | 1,139 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 543 curve and line segments |
Measured from the file. PNG: 2,000 × 1,075 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.52 in (25 × 13 mm) | 0.58 mm | 289 mm | 160 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.04 in (51 × 26 mm) | 1.2 mm | 579 mm | 45 | Vinyl, card and thin sheet |
| 3 × 1.56 in (76 × 40 mm) | 1.8 mm | 868 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.08 in (102 × 53 mm) | 2.3 mm | 1,157 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.11 in (152 × 79 mm) | 3.5 mm | 1,736 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.15 in (203 × 105 mm) | 4.7 mm | 2,314 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.23 in (305 × 158 mm) | 7 mm | 3,472 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More You’re the Peanut Butter to My Jelly SVG files
-
Peanut Butter to My Jelly in Alfa Slab One Solid · 29 pieces -
Peanut Butter to My Jelly in Amatic SC Solid · 30 pieces -
Peanut Butter to My Jelly in block capitals Solid · 30 pieces -
Peanut Butter to My Jelly in script and capitals Solid · 25 pieces -
Peanut Butter to My Jelly with hearts Solid · 21 pieces -
Peanut Butter to My Jelly outline lettering Outline · 33 pieces -
Peanut Butter to My Jelly stencil plate Solid · one piece -
Peanut Butter to My Jelly with a drop shadow Layered · 20 pieces
← Peanut Butter to My Jelly in Kaushan Script All 12 You’re the Peanut Butter to My Jelly designs Peanut Butter to My Jelly in Alfa Slab One →