Free Your Wings Were Ready SVG

Your Wings Were Ready outline lettering SVG

Your Wings Were Ready outline lettering, drawn as a line
Your Wings Were Ready outline lettering. The preview is the SVG file itself.

“Your Wings Were Ready” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 37 mm (3.94 × 1.44 in), scales to any size
Pieces20 separate pieces
Outlines to cut54: 20 outer edges and 34 cut-outs
Cut length1,491 mm at this size
Narrowest part1.4 mm at this size
Nodes562 curve and line segments

Measured from the file. PNG: 2,000 × 779 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.37 in (25 × 9 mm)0.36 mm379 mm210Too fine for most machines
2 × 0.73 in (51 × 19 mm)0.71 mm757 mm65Fine detail: vinyl and paper only, weed with care
3 × 1.1 in (76 × 28 mm)1.1 mm1,136 mm27Vinyl, card and thin sheet
4 × 1.46 in (102 × 37 mm)1.4 mm1,515 mm14Vinyl, card and thin sheet
6 × 2.19 in (152 × 56 mm)2.1 mm2,272 mm5Vinyl, card and thin sheet
8 × 2.92 in (203 × 74 mm)2.8 mm3,030 mm3Vinyl, card and thin sheet
12 × 4.38 in (305 × 111 mm)4.3 mm4,545 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Your Wings Were Ready SVG files

← Your Wings Were Ready with hearts All 12 Your Wings Were Ready designs Your Wings Were Ready stencil plate →