Free XOXO SVG

XOXO stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

XOXO stencil plate, as a solid black shape
XOXO stencil plate. The preview is the SVG file itself.

A rounded plate with “XOXO” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 50 mm (3.94 × 1.96 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length854 mm at this size
Narrowest part1.7 mm at this size
Nodes110 curve and line segments

Measured from the file. PNG: 2,000 × 1,035 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.5 in (25 × 13 mm)0.43 mm217 mm170Too fine for most machines
2 × 1 in (51 × 25 mm)0.86 mm434 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.49 in (76 × 38 mm)1.3 mm651 mm21Vinyl, card and thin sheet
4 × 1.99 in (102 × 51 mm)1.7 mm868 mm10Vinyl, card and thin sheet
6 × 2.99 in (152 × 76 mm)2.6 mm1,301 mm3Vinyl, card and thin sheet
8 × 3.98 in (203 × 101 mm)3.5 mm1,735 mm2Any material, including 3 mm wood and acrylic
12 × 5.98 in (305 × 152 mm)5.2 mm2,603 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More XOXO SVG files

← XOXO outline lettering All 13 XOXO designs XOXO with a drop shadow →